waiting... ==========! ********** Pass-1: Copy object. Pass-2: Excute program. Command line argument limits memory to 14MB. Detected 16MB of memory. Will use 14MB of it. Loading R4000 MMU routines. CPU revision is: 00000c52 Primary instruction cache 16kb, linesize 16 bytes. Primary data cache 8kb, linesize 16 bytes. Linux version 2.4.0-test9 (root@l5ac198.l5.laser5.co.jp) (gcc version egcs-2.90. 29 980515 (egcs-1.0.3 release)) #1 Wed Feb 14 10:42:09 JST 2001 On node 0 totalpages: 3584 zone(0): 3584 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,115200 root=/dev/hda1 rw Calibrating delay loop... 43.21 BogoMIPS Memory: 12324k/14336k available (1430k kernel code, 2012k reserved, 72k data, 56 k init) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 512) Starting kswapd v1.8 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx eth0: cs8900 rev J found at 0x300 [Cirrus EEPROM] cs89x0 media RJ-45, IRQ 44, programmed I/O, MAC 00:20:0f:00:0d:17 VR41xx Serial driver version 0.4 (22-Oct-2000) ttyS00 at 0xac000010 (irq = 17) is a 16550A ttyS01 at 0xac000000 (irq = 17) is a 16550A ttyS02 at 0xac000000 (irq = 17) is a 16550A Linux PCMCIA Card Services 3.1.20 options: none Intel PCIC probe: Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 1 socket host opts [0]: none ISA irqs (scanned) = 26 polling interval = 1000 ms <4>eth0: 10Base-T (RJ-45) has no cable eth0: no network cable attached to configured media IP-Config: Failed to open eth0 IP-Config: No network devices available. kmem_create: Forcing size word alignment - nfs_fh cs: IO port probe 0x0100-0x04ff: excluding 0x100-0x107 0x350-0x4ff initializing socket 0 cs: memory probe 0x0d0000-0x0dffff: clean. socket 0: ATA/IDE Fixed Disk hda: SanDisk SDCFB-64, ATA DISK drive ide0 at 0x110-0x117,0x11e on irq 26 hda: 125440 sectors (64 MB) w/1KiB Cache, CHS=490/8/32 Partition check: hda: hda1 ide_cs: hda: Vcc = 5.0, Vpp = 0.0 hda: hda1 hda: hda1 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 56k freed INIT: version 2.76 booting in rcS, got args Remounting root device with read-write enabled <4>eth0: 10Base-T (RJ-45) has no cable eth0: no network cable attached to configured media SIOCSIFFLAGS: Try again <4>eth0: 10Base-T (RJ-45) has no cable eth0: no network cable attached to configured media SIOCSIFFLAGS: Try again SIOCADDRT: Network is unreachable INIT: Entering runlevel: 2 in rcS, got args 2 Running shutdown script 2: (none) login: root # mount /dev/hdc1 on / type ext2 (rw) /proc on /proc type proc (rw) # df Filesystem 1024-blocks Used Available Capacity Mounted on /dev/hdc1 60717 43669 13913 76% / # ps ax PID TTY STAT TIME COMMAND 1 ? S 0:04 init 2 ? SW 0:00 [kswapd] 3 ? SW 0:00 [kreclaimd] 4 ? SW 0:00 [kflushd] 5 ? SW 0:00 [kupdate] 6 ? SW 0:00 [kcardd] 19 ? S 0:01 inetd 23 ? S 0:00 /sbin/update 26 ttyS0 S 0:02 -tcsh 30 ttyS0 R 0:00 ps ax # uname -a Linux (none) 2.4.0-test9 #1 Wed Feb 14 10:42:09 JST 2001 mips unknown # shutdown -h now Broadcast message from root (ttyS0) Thu Jan 1 00:01:44 1970... The system is going down for system halt NOW !! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal # INIT: Sending processes the KILL signal in rcS, got args 0 Running shutdown script 0: Unmounting local file systems. /dev/hdc1: Invalid argument The system is halted. Power down.