# $XFree86: xc/programs/Xserver/hw/xfree86/XF86Conf.cpp,v 3.29.2.3 1999/06/02 07:50:27 hohndel Exp $ # # Copyright (c) 1994 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $ # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. This man page is installed as /usr/X11R6/man/man5/XF86Config.5x # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # For OSs that support Dynamically loaded modules, ModulePath can be # used to set a search path for the modules. This is currently supported # for Linux ELF, FreeBSD 2.x and NetBSD 1.x. The default path is shown # here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Module section -- this is an optional section which is used to specify # which dynamically loadable modules to load. Dynamically loadable # modules are currently supported only for Linux ELF, FreeBSD 2.x # and NetBSD 1.x. Currently, dynamically loadable modules are used # only for some extended input (XInput) device drivers. # ********************************************************************** # # Section "Module" # # This loads the module for the Joystick driver # # Load "xf86Jstk.so" # # EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # DisableVidModeExtension # Uncomment this to enable the use of a non-local xvidtune client. # AllowNonLocalXvidtune # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # DisableModInDev # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # AllowNonLocalModInDev EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: # LeftAlt Meta # RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock # To disable the XKEYBOARD extension, uncomment XkbDisable. # XkbDisable # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # XkbModel "pc102" # If you have a Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # These are the default XKB settings for XFree86 # XkbRules "xfree86" # XkbModel "pc101" # XkbLayout "us" # XkbVariant "" # XkbOptions "" XkbKeycodes "xfree86" XkbTypes "default" XkbCompat "default" XkbSymbols "us(pc101)" XkbGeometry "pc" XkbRules "xfree86" XkbModel "jp106" XkbLayout "jp" XkbOptions "ctrl:swapcaps" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" # Protocol "Microsoft" # Device "/dev/mouse" Protocol "PS/2" Device "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Emulate3Buttons # Emulate3Timeout 50 # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Generic Monitor" VendorName "Sony" ModelName "VAIO-C1XF" HorizSync 20-110 # multisync VertRefresh 50-100 # multisync Mode "640x480" DotClock 25.175 HTimings 640 664 760 800 VTimings 480 491 493 525 EndMode Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -hsync -vsync # Mode "1024x480" # DotClock 65 # HTimings 1024 1032 1176 1344 # VTimings 480 491 493 525 -hsync -vsync # EndMode Mode "1024x768" DotClock 65 HTimings 1024 1048 1208 1264 VTimings 768 776 784 817 EndMode EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" Identifier "NeoMagic" VendorName "Sony" BoardName "VAIO-C1XF" Chipset "NM2200" # VideoRam 2560 Option "override_validate_mode" Option "intern_disp" Option "extern_disp" Option "no_stretch" # Option "lcd_center" EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The colour SVGA server Section "Screen" Driver "svga" Device "NeoMagic" Monitor "Generic Monitor" # DefaultColorDepth 24 # DefaultColorDepth 16 Subsection "Display" Depth 16 # Modes "1024x768" Modes "1024x480" ViewPort 0 0 # Virtual 1024 768 EndSubsection EndSection